AUTOPLAY
vintage style lodge sign
9 steps
Hey guys! I’m Teri!
What you’ll need
MDF Wood Board
Chain
Craft Paint
Putty Knife
Cup Hooks
paint a white base onto thin MDF board
1. paint a white base onto thin MDF board
1
next, cover MDF board with a coat of yellow paint that will be your accent color.
2. next, cover MDF board with a coat of yellow paint that will be your accent color.
2
once paint has dried, use a putty knife to chip yellow paint for a worn look.
3. once paint has dried, use a putty knife to chip yellow paint for a worn look.
3
use a pencil to freehand text. then fill in with paint.
4. use a pencil to freehand text. then fill in with paint.
4
if a worn look is desired, repeat paint scraping technique with putty knife.
5. if a worn look is desired, repeat paint scraping technique with putty knife.
5
drill two small pilot holes in top of MDF board where hooks will attach
6. drill two small pilot holes in top of MDF board where hooks will attach
6
apply a single drop of gorilla glue over the pilot holes
7. apply a single drop of gorilla glue over the pilot holes
7
install cup hooks over glued holes. the glue will insure your hooks will stay in place.
8. install cup hooks over glued holes. the glue will insure your hooks will stay in place.
8
use a chain to hang your sign.
9. use a chain to hang your sign.
9
tmoorehome.com