AUTOPLAY
Textured Bisque Mold
16 steps
Hello!
Roll out a slab and smooth it out.
1. Roll out a slab and smooth it out.
1
Lay the slab over the mold
2. Lay the slab over the mold
2
Let dry to middle stage of Leather Hard
3. Let dry to middle stage of Leather Hard
3
Dry slowly
4. Dry slowly
4
You can use anything to decorate with!
5. You can use anything to decorate with!
5
Stuff with plastic
6. Stuff with plastic
6
Smooth and it out with your finger
7. Smooth and it out with your finger
7
Place your bowl back on top of your mold then press your designs in
8. Place your bowl back on top of your mold then press your designs in
8
Add more decoration using different tools
9. Add more decoration using different tools
9
Add some sunken relief carving to create more interest.
10. Add some sunken relief carving to create more interest.
10
Leave the burrs
11. Leave the burrs
11
Let dry a little
12. Let dry a little
12
Brush off the burrs.
13. Brush off the burrs.
13
Take it off of the mold
14. Take it off of the mold
14
Gently rub the sponge over the rim and the inside to smooth it out.
15. Gently rub the sponge over the rim and the inside to smooth it out.
15
This is your templatešŸ’„
16. This is your templatešŸ’„
16
Thanks!