AUTOPLAY
Photo Pendant Necklace
10 steps
What you’ll need
Pendant & Glass Lens
Gloves
Toothpicks
E6000 Glue
Printable Card Stock
Paint Brush
Cotton Balls
Mod Podge Gloss
Chain
Rubbing Alcohol
I designed photo circles in DS with the circle shape and SLICE command for perfect circles.
1. I designed photo circles in DS with the circle shape and SLICE command for perfect circles.
1
Print on printable Cardstock.
2. Print on printable Cardstock.
2
Cut out with Cricut or 1 inch hole punch.
3. Cut out with Cricut or 1 inch hole punch.
3
Apply a small drop of clear gloss modpodge to the center of the photo.
4. Apply a small drop of clear gloss modpodge to the center of the photo.
4
Smash the lens onto the photo and work out bubbles and excess MP with pressure.
5. Smash the lens onto the photo and work out bubbles and excess MP with pressure.
5
Turn over and apply MP with brush to the back of the photo to seal. 2-3 coats.
6. Turn over and apply MP with brush to the back of the photo to seal. 2-3 coats.
6
Once MP is dry, apply E6000 to the pendant and spread evenly.
7. Once MP is dry, apply E6000 to the pendant and spread evenly.
7
Drop glass lens + photo onto pendant and apply pressure. Make sure your image is oriented correctly.
8. Drop glass lens + photo onto pendant and apply pressure. Make sure your image is oriented correctly.
8
Wipe excess glue with cotton ball & alcohol. Let dry.
9. Wipe excess glue with cotton ball & alcohol. Let dry.
9
Add chain.
10. Add chain.
10