AUTOPLAY
Permanent Vinyl On Water Bottle
9 steps
Hello!
What you’ll need
Cricut makes
Metal Water Bottle
Transfer Tape
Light Grip Mat
Cricut Weeding Tool
Scissors
Cricut Scraper Tool
Ruler
Gather Supplies
1. Gather Supplies
1
Prep Design to cut use WASHI Setting
2. Prep Design to cut use WASHI Setting
2
Place Permanent Vinyl color up
3. Place Permanent Vinyl color up
3
If using large roll on small project use the sticky mat to keep it rolled so you don’t waste any
4. If using large roll on small project use the sticky mat to keep it rolled so you don’t waste any
4
Let design cut if you see any pieces of vinyl come up with the blade you’ll need to clean the blade
5. Let design cut if you see any pieces of vinyl come up with the blade you’ll need to clean the blade
5
Cut out and weed image carefully. Disregard my hair come undone.😅
6. Cut out and weed image carefully. Disregard my hair come undone.😅
6
Prepare Transfer Tape and use scraper to help the tape cling to the vinyl
7. Prepare Transfer Tape and use scraper to help the tape cling to the vinyl
7
Stabilize water bottle and line up image to place on. Start pressing from the middle out slowly.
8. Stabilize water bottle and line up image to place on. Start pressing from the middle out slowly.
8
Let cure for 24 hours so just set it in a room temperature room and don’t handle it hand wash
9. Let cure for 24 hours so just set it in a room temperature room and don’t handle it hand wash
9