AUTOPLAY
No Sew Mickey Celebration Bow Tie
10 steps
Hello!
What you’ll need
2.5” x 10”
10” Plastic By The Yard
Plain Mickey Ears
Buy
1 roll
Yellow Duct Tape
Clear Glue
Buy
Rainbow Sequins And Glitter
Super Glue
Buy
Spread a thin layer of clear glue to the middle section of the plastic
1. Spread a thin layer of clear glue to the middle section of the plastic
1
Sprinkle on the sequins
2. Sprinkle on the sequins
2
Shake on some glitter
3. Shake on some glitter
3
If your duct tape is too wide, cut it in half to be about 1” wide
4. If your duct tape is too wide, cut it in half to be about 1” wide
4
Fold the piece into thirds, bringing the edges into the center
5. Fold the piece into thirds, bringing the edges into the center
5
Enclose the edges with the duct tape, folding it over the top and bottom edge.
6. Enclose the edges with the duct tape, folding it over the top and bottom edge.
6
Cut off the excess
7. Cut off the excess
7
Pinch the bow in the center and wrap a piece of duct tape around the middle to secure
8. Pinch the bow in the center and wrap a piece of duct tape around the middle to secure
8
Wrap around with another piece of tape to secure a clip to the back of the bow
9. Wrap around with another piece of tape to secure a clip to the back of the bow
9
You can create a clear bow by supergluing the edges together instead of using duct tape
10. You can create a clear bow by supergluing the edges together instead of using duct tape
10
Thanks!