AUTOPLAY
Ms. A’s Magnificent Magnifying Magnets
14 steps
Gather shown materials
1. Gather shown materials
1
Place glass bead on top of your printed image and trace.
2. Place glass bead on top of your printed image and trace.
2
Your tracing should be the same size as glass bead .
3. Your tracing should be the same size as glass bead .
3
Now use exacto knife or scissors to cut (age 10 and under ask adult for assistance)
4. Now use exacto knife or scissors to cut (age 10 and under ask adult for assistance)
4
Fully Remove image
5. Fully Remove image
5
Now Gather clear glue or modpodge and paint brunsh .
6. Now Gather clear glue or modpodge and paint brunsh .
6
Open bottle and lightly coat brush with chosen Sealent .
7. Open bottle and lightly coat brush with chosen Sealent .
7
Lightly coat front of image with sealant.
8. Lightly coat front of image with sealant.
8
Place bead on top of the image .
9. Place bead on top of the image .
9
Gently Smooth image on bead and add glue to magnet(s)
10. Gently Smooth image on bead and add glue to magnet(s)
10
Add magnet
11. Add magnet
11
Ps: If one magnet is not strong enough add another for extra strength .
12. Ps: If one magnet is not strong enough add another for extra strength .
12
Let dry on flat surface then add to your fridge .
13. Let dry on flat surface then add to your fridge .
13
 Voilà! You can use different images to create more unique magnets .
14.  Voilà! You can use different images to create more unique magnets .
14