AUTOPLAY
Hello!
Line up your wallpaper with the top edge of your pre cut MDF board
1. Line up your wallpaper with the top edge of your pre cut MDF board
1
Slowly pull the backing off your wallpaper while smoothing out any bubbles as you go
2. Slowly pull the backing off your wallpaper while smoothing out any bubbles as you go
2
Make a hard crease on the sides
3. Make a hard crease on the sides
3
Fold and press down your wallpaper to cover the sides and trim the extra with scissors if needed
4. Fold and press down your wallpaper to cover the sides and trim the extra with scissors if needed
4
Measure the sides of your sign to cut the wood for the frame
5. Measure the sides of your sign to cut the wood for the frame
5
Cut the 1x2 wood for the frame
6. Cut the 1x2 wood for the frame
6
Check to make sure your wood fits and trim any pieces if needed
7. Check to make sure your wood fits and trim any pieces if needed
7
Stain your 1x2 pieces for the frame
8. Stain your 1x2 pieces for the frame
8
Once your stain is dry run a small bead of glue along the 1x2 board
9. Once your stain is dry run a small bead of glue along the 1x2 board
9
Finally secure in place with a nail gun or a hammer and nails
10. Finally secure in place with a nail gun or a hammer and nails
10
Thanks!
