AUTOPLAY
Make A Thanksgiving Gratitude Plate
9 steps
Hello!
What you’ll need
Fall Themed Plate
Buy
Hot Glue
Fine Pointed Brush
Burlap Ribbon
Foam Paper
Pinecones & Leaves
Scissors
Dark Acrylic Paint
Measure your burlap and cut with a little extra to be safe
1. Measure your burlap and cut with a little extra to be safe
1
Cut a similar colored foam paper to the same dimensions as the burlap
2. Cut a similar colored foam paper to the same dimensions as the burlap
2
Trim down your foam and ribbon so that it’s centered on the plate
3. Trim down your foam and ribbon so that it’s centered on the plate
3
Hot glue your foam paper to the plate
4. Hot glue your foam paper to the plate
4
Glue just around the edges of the foam and press your burlap down with a pencil (it’s hot!)
5. Glue just around the edges of the foam and press your burlap down with a pencil (it’s hot!)
5
Pull a few strings from the edge so that the tops and sides have an equal amount of fray
6. Pull a few strings from the edge so that the tops and sides have an equal amount of fray
6
Practice on a similar size first, then use the burlap as a grid & paint on what you’re grateful for
7. Practice on a similar size first, then use the burlap as a grid & paint on what you’re grateful for
7
Find a good placement for your accessories
8. Find a good placement for your accessories
8
Hot glue the accessories to the plate
9. Hot glue the accessories to the plate
9
Thanks!