AUTOPLAY
Make A Tea Pot
11 steps
Hello!
Opening the pot
1. Opening the pot
1
Open up the pot
2. Open up the pot
2
Straighten the pot out by holding the outside with your palm. Gently press out with your fingers.
3. Straighten the pot out by holding the outside with your palm. Gently press out with your fingers.
3
Pull your walls
4. Pull your walls
4
Press the bottom half of the pot outward
5. Press the bottom half of the pot outward
5
Continue forming the pot and squeeze the top slightly
6. Continue forming the pot and squeeze the top slightly
6
Make a lip
7. Make a lip
7
Trim the lip if it is uneven
8. Trim the lip if it is uneven
8
Bend the lip out and clean it up. Trim excess off the bottom.
9. Bend the lip out and clean it up. Trim excess off the bottom.
9
Measure the top
10. Measure the top
10
Wet down the bat, pull the wire through, and slide the pot off.
11. Wet down the bat, pull the wire through, and slide the pot off.
11
Thanks!