AUTOPLAY
Make A Make & Take Sign
9 steps
What you’ll need
Make & Take Supplies
Buy
Paint around all 4 edges.
1. Paint around all 4 edges.
1
Paint the front. Use thin coats to dry quickly.
2. Paint the front. Use thin coats to dry quickly.
2
Once your paint is dry, apply a second thin coat of paint.
3. Once your paint is dry, apply a second thin coat of paint.
3
While your paint dries, use the scraper card on the back of the vinyl to activate the adhesive.
4. While your paint dries, use the scraper card on the back of the vinyl to activate the adhesive.
4
When your paint is completely dry, line up your vinyl and tape to the board.
5. When your paint is completely dry, line up your vinyl and tape to the board.
5
SLOWLY Peel the paper backing from one side of the vinyl and smooth it down.
6. SLOWLY Peel the paper backing from one side of the vinyl and smooth it down.
6
Remove the tape in the middle and repeat on the other side.
7. Remove the tape in the middle and repeat on the other side.
7
Use the scraper card on the front of the transfer tape to help the vinyl adhere to your board.
8. Use the scraper card on the front of the transfer tape to help the vinyl adhere to your board.
8
SLOWLY peel back the transfer tape.
9. SLOWLY peel back the transfer tape.
9
Thanks!