AUTOPLAY
Let’s Start Painting! Skin/Base Coat-Part 2
10 steps
What you’ll need
Baby Skin Or Flesh #08
Makeup Wedges
Odorless Mineral Spirits And Dispensing Container
Craft Sticks And Wide Paint Brush
Jar For Mixing
Mixing your paint-add a small amount of thinner to your jar.
1. Mixing your paint-add a small amount of thinner to your jar.
1
Using your craft stick and brush, add small amts. of Flesh 08 or Baby skin at a time and mix well.
2. Using your craft stick and brush, add small amts. of Flesh 08 or Baby skin at a time and mix well.
2
Your mixture should have the consistency of a thin coffee creamer,
3. Your mixture should have the consistency of a thin coffee creamer,
3
Take a makeup wedge and give it a torn edge on the wide end,
4. Take a makeup wedge and give it a torn edge on the wide end,
4
Dab torn end of the sponge well with the baby skin mixture. Dab off excess onto paper towel.
5. Dab torn end of the sponge well with the baby skin mixture. Dab off excess onto paper towel.
5
Using light dabbing, apply the baby skin to the entire kit. You should see small milky bubbles.
6. Using light dabbing, apply the baby skin to the entire kit. You should see small milky bubbles.
6
Continue adding baby skin to the rest of the kit. Allow to dry on rack without touching.
7. Continue adding baby skin to the rest of the kit. Allow to dry on rack without touching.
7
Once completely dry. Bake all pieces in well ventilated NuWave style oven. 250 deg. for 10 minutes
8. Once completely dry. Bake all pieces in well ventilated NuWave style oven. 250 deg. for 10 minutes
8
CAUTION! Parts will be hot! Cool completely before removing from oven!
9. CAUTION! Parts will be hot! Cool completely before removing from oven!
9
On to Step 3! Mottling Layers! You’re on a roll!
10. On to Step 3! Mottling Layers! You’re on a roll!
10