AUTOPLAY
Iron-on Ink Tumblers
8 steps
Cut out your template.
1. Cut out your template.
1
Trace your design.
2. Trace your design.
2
Make sure all of your letters are backwards.
3. Make sure all of your letters are backwards.
3
Color your design using Artesprix Iron-on Ink Markers. Only the ink will transfer to your project.
4. Color your design using Artesprix Iron-on Ink Markers. Only the ink will transfer to your project.
4
Tape your template together with heat tape and place marker side down on the tumbler.
5. Tape your template together with heat tape and place marker side down on the tumbler.
5
Place your tumbler in the sleeve.
6. Place your tumbler in the sleeve.
6
Use the heat gun to shrink the wrap to the tumbler. Put in toaster oven at 350F for 5 min.
7. Use the heat gun to shrink the wrap to the tumbler. Put in toaster oven at 350F for 5 min.
7
Allow it to cool and then take off the heat wrap and the paper. It’s finished!
8. Allow it to cool and then take off the heat wrap and the paper. It’s finished!
8