How toUse Pigment Sprinkles From Stampin’ UP!
14 steps
What you’ll need
Pigment Sprinkles
Buy
Fluid 100 Watercolor Paper
Buy
Aqua Painter
Buy
Stampin’ Spritzer
Buy
Cut Fluid 100 Watercolor Paper to 3-1/2” x 5” and stamp image with Versamark ink
1
Sprinkle image with Shimmer Black Emboss Powder then heat until melted with a heat tool
2
Once cooled, use washi or painters tape to adhere paper to a scrap of cardboard
3
Sprinkle a small amount of each color over the stamped image. A little goes a long way!
4
Use a Stampin’ Spritzer filled with water to mist paper. Blot with a paper towel if desired.
5
Continue to move color by spritzing and blotting until you are happy with the end result.
6
Allow to fully dry, then finish card. Check my blog for additional supplies needed.
7
Stamp and emboss image as shown earlier. Tap a small amount of crystals onto an acrylic block.
8
Use an aqua painter to add water to crystals then color image as desired.
9
Continue coloring with all the colors, blotting with a paper towel if needed.
10
Load the aqua painter with your favorite color then gently flick over the image to create splatters.
11
A look at the finished card. You can create different depths of color with the pigment Sprinkles
12
With an aqua painter, saturate the paper with water. Add a wash of the sprinkles over the image.
13
Check out my blog to see the completed card: thestampdoc.com Thanks for watching!
14
1
2
3
4
5
6
7
8
9
10
11
12
13
14