AUTOPLAY
How to Use Iron-on Vinyl
10 steps
Create your design in Design Space - in the cut settings, select your material and press MIRROR
1. Create your design in Design Space - in the cut settings, select your material and press MIRROR
1
Cut your design out with your machine. Liner (or “pretty”) side down!
2. Cut your design out with your machine. Liner (or “pretty”) side down!
2
Weed out the excess from the liner - only the final design should remain
3. Weed out the excess from the liner - only the final design should remain
3
Using an EasyPress? go to the EasyPress guide and pick the iron on type and blank material
4. Using an EasyPress? go to the EasyPress guide and pick the iron on type and blank material
4
If using an iron, set to the temperature that coorelates with your blank material
5. If using an iron, set to the temperature that coorelates with your blank material
5
Preheat the surface for 5 seconds
6. Preheat the surface for 5 seconds
6
Lay material on an EasyPress May or firm surface (such as an ironing board)
7. Lay material on an EasyPress May or firm surface (such as an ironing board)
7
Lay the decal on top. Firmly press with your EP or Iron for time suggested in guide (45-60 for iron)
8. Lay the decal on top. Firmly press with your EP or Iron for time suggested in guide (45-60 for iron)
8
Flip over and press on the opposite side for 15 seconds. Remove liner.
9. Flip over and press on the opposite side for 15 seconds. Remove liner.
9
You will remove the liner when it is cool, warm, or hot - see material instructions for specifics.
10. You will remove the liner when it is cool, warm, or hot - see material instructions for specifics.
10
Thank you!