AUTOPLAY
How To Use Cricut Iron-On Vinyl
14 steps
Pre-wash item before application.
1. Pre-wash item before application.
1
Create and size the image in Cricut Design Space.
2. Create and size the image in Cricut Design Space.
2
Click to mirror the image prior to cutting so it appears backwards.
3. Click to mirror the image prior to cutting so it appears backwards.
3
Place Iron-on sheet liner side down, onto a standard grip cutting mat.
4. Place Iron-on sheet liner side down, onto a standard grip cutting mat.
4
Load mat into the machine and watch it do it’s magic and cut the image.
5. Load mat into the machine and watch it do it’s magic and cut the image.
5
Remove negative Iron-on film, leaving only the image on the liner.
6. Remove negative Iron-on film, leaving only the image on the liner.
6
Use a weeding tool for smaller detailed areas.
7. Use a weeding tool for smaller detailed areas.
7
Use the recommended settings chart for time and temperature based on the materials.
8. Use the recommended settings chart for time and temperature based on the materials.
8
Preheat the EasyPress and set the timer.
9. Preheat the EasyPress and set the timer.
9
Clean with a lint roller and preheat the fabric before application.
10. Clean with a lint roller and preheat the fabric before application.
10
Place image liner side up and press with medium pressure. Turn over and repeat.
11. Place image liner side up and press with medium pressure. Turn over and repeat.
11
Test a corner. If the liner doesn’t lift easily, reheat for a few more seconds.
12. Test a corner. If the liner doesn’t lift easily, reheat for a few more seconds.
12
Carefully peel off liner while warm.
13. Carefully peel off liner while warm.
13
Admire your one-of-a-kind Disney swag! Have a magical time!
14. Admire your one-of-a-kind Disney swag! Have a magical time!
14