AUTOPLAY
How To Use A Drill
14 steps
What you’ll need
Drill
Screw Driver Bits
Parts of the drill: chuck, drill shaft, trigger, reverse switch and the power source.
1. Parts of the drill: chuck, drill shaft, trigger, reverse switch and the power source.
1
Most drills have removable and rechargeable batteries.
2. Most drills have removable and rechargeable batteries.
2
All about drill bits, common driver types and screws.
3. All about drill bits, common driver types and screws.
3
A closer look at coarse and fine threaded screws.
4. A closer look at coarse and fine threaded screws.
4
Make sure you always test your screws and driver bits! It should fit snugly, not too tight or loose.
5. Make sure you always test your screws and driver bits! It should fit snugly, not too tight or loose.
5
Test your bits & know which screws to use. If not, your screw will be come stripped & lose its shape
6. Test your bits & know which screws to use. If not, your screw will be come stripped & lose its shape
6
The buttons on either side change the direction of the drill. Lefty loosey, righty tighty!
7. The buttons on either side change the direction of the drill. Lefty loosey, righty tighty!
7
The numbers determine how much torque your drill will apply. Torque is the amount of power applied.
8. The numbers determine how much torque your drill will apply. Torque is the amount of power applied.
8
The drill setting bypasses all the numbers. It will apply as much torque as the drill can handle.
9. The drill setting bypasses all the numbers. It will apply as much torque as the drill can handle.
9
Always test your wood strength to determine what torque to use. Mine is soft, so I used #3.
10. Always test your wood strength to determine what torque to use. Mine is soft, so I used #3.
10
Applying too much pressure/using the wrong torque setting will dent the wood.
11. Applying too much pressure/using the wrong torque setting will dent the wood.
11
To change your drill bit, just screw the top to the right!
12. To change your drill bit, just screw the top to the right!
12
To close it, twist to the left!
13. To close it, twist to the left!
13
To take the screw out, just click the drill to the left!
14. To take the screw out, just click the drill to the left!
14