How toMake Drum Sticks
6 steps
What you’ll need
18 inch dowel per student
Dowel Rods
2 rolls
Masking Tape
1/4 sheet per student
Sandpaper 220 Grit
1 per student pair
Hacksaw Blade 24 tpi, 10”
5 sheets per student
Tag Board
Class set
Assorted Crayola Markers
Sheets cut in 1/4 to 4 inch by 3 inches
Sticky Foam
1/4 sheet per student
Sandpaper 100 Grit
Set up your cutting mats using a stack of 5 sheets of tag board taped to cover the edge of the table
1
Prepare hacksaws for little hands by cutting each sawblade in half.
2
Wrap the end of both blades in sticky tape to made a handle.
3
Mark halfway. Use your new saw to saw through the drumsticks. Saw lightly for best results.
4
Sand both drumsticks with 100 grit then 220 grit. Sand longer then you think you need to.
5
Decorate using crayola markers!
6
1
2
3
4
5
6