AUTOPLAY
How to Make a Tire Swing
7 steps
What you’ll need
Here's What You'll Need
1
Quick Link
Buy
3
u-bolts
Buy
1
carabiner
Buy
1
steel chain
Buy
An Old Tire
Drill evenly spaced drainage holes along it’s sidewall on the bottom of the tire.
1. Drill evenly spaced drainage holes along it’s sidewall on the bottom of the tire.
1
Flip the tire over and drill 3 sets of holes for the u-bolts spaced 1/3 apart around the tire.
2. Flip the tire over and drill 3 sets of holes for the u-bolts spaced 1/3 apart around the tire.
2
Attach the chain by taking one side of the U-bolt out and sliding onto chain.
3. Attach the chain by taking one side of the U-bolt out and sliding onto chain.
3
Secure the plates of the U-bolts by screwing on the hex nuts.
4. Secure the plates of the U-bolts by screwing on the hex nuts.
4
Find a sturdy tree branch that is ideally 8-12 feet off of the ground.
5. Find a sturdy tree branch that is ideally 8-12 feet off of the ground.
5
Attach the three chains from the tire by sliding them onto the quick link.
6. Attach the three chains from the tire by sliding them onto the quick link.
6
For more details visit https://toolboxdivas.com/diy-tire-swing/
7. For more details visit https://toolboxdivas.com/diy-tire-swing/
7