How toMake A Make & Take Sign
9 steps
What you’ll need
Make & Take Supplies
Buy
Paint around all 4 edges.
1
Paint the front. Use thin coats to dry quickly.
2
Once your paint is dry, apply a second thin coat of paint.
3
While your paint dries, use the scraper card on the back of the vinyl to activate the adhesive.
4
When your paint is completely dry, line up your vinyl and tape to the board.
5
SLOWLY Peel the paper backing from one side of the vinyl and smooth it down.
6
Remove the tape in the middle and repeat on the other side.
7
Use the scraper card on the front of the transfer tape to help the vinyl adhere to your board.
8
SLOWLY peel back the transfer tape.
9
Thanks!
1
2
3
4
5
6
7
8
9