AUTOPLAY
Holiday Embroidery Hoop With The Cricut
10 steps
Hello!
Use fabric or cut an old shirt slightly larger than the embroidery hoop.
1. Use fabric or cut an old shirt slightly larger than the embroidery hoop.
1
Lay a piece of Iron-on sheet, liner side down on a standard grip cutting mat.
2. Lay a piece of Iron-on sheet, liner side down on a standard grip cutting mat.
2
Load mat into the machine, let it do it’s magic and unload.
3. Load mat into the machine, let it do it’s magic and unload.
3
Remove negative Iron-on film leaving only the image on the liner.
4. Remove negative Iron-on film leaving only the image on the liner.
4
Preheat EasyPress and preheat the fabric.
5. Preheat EasyPress and preheat the fabric.
5
Place image liner side up. Press with medium pressure. Flip and repeat. Check and reheat if needed.
6. Place image liner side up. Press with medium pressure. Flip and repeat. Check and reheat if needed.
6
Double up with a piece of felt and center your image in the embroidery hoop.
7. Double up with a piece of felt and center your image in the embroidery hoop.
7
Add hot glue to the felt and press back extra fabric for a clean look.
8. Add hot glue to the felt and press back extra fabric for a clean look.
8
Add some festive greenery to hide the top.
9. Add some festive greenery to hide the top.
9
Hang and spread Christmas cheer!
10. Hang and spread Christmas cheer!
10