AUTOPLAY
Hang Curtains
12 steps
What you’ll need
Electric hand drillh
1 (need window width dimensions)
Telescoping curtain rod
1
Cardboard with right angle cut out
2
Curtain rod endcaps
2-4
Holder screws
Step stool
2
Curtain rod holders
1 set
Curtains
Using the cardboard, align the right angle with the edge of the window frame
1. Using the cardboard, align the right angle with the edge of the window frame
1
Place the rod hanger on the cardboard where you’d like to install it.
2. Place the rod hanger on the cardboard where you’d like to install it.
2
Using a pencil, mark through the rod holder screw holes onto the cardboard.
3. Using a pencil, mark through the rod holder screw holes onto the cardboard.
3
Poke holes in the cardboard.
4. Poke holes in the cardboard.
4
Align the cardboard on the window frame and make a mark on the walkthrough the holes.
5. Align the cardboard on the window frame and make a mark on the walkthrough the holes.
5
Flip the cardboard and repeat on the other side of the window.
6. Flip the cardboard and repeat on the other side of the window.
6
Drill pilot holes in all marked areas on wall.
7. Drill pilot holes in all marked areas on wall.
7
Align the rod holder with the holes and screw to wall. Repeat on other side of window frame.
8. Align the rod holder with the holes and screw to wall. Repeat on other side of window frame.
8
Using the rod, extend to desired length.
9. Using the rod, extend to desired length.
9
Place curtains on rod.
10. Place curtains on rod.
10
Tighten rod holders on rod.
11. Tighten rod holders on rod.
11
Screw on rod end caps.
12. Screw on rod end caps.
12