AUTOPLAY
Grey Water System Instructions
16 steps
Grey water tank valve overview
1
Valve 1 switch the pump on, Valve 2 is supply from the Grey water tank valve 3 supply from rain tank
2
Every 2nd day the grey water tank fills up with shower water, lifting the cover will shows level
3
Make sure valve 2 in open position (this pic it is closed)
4
valve 2 in a open position
5
Open valve 1, pump will switch on
6
Valve one in the open position
7
Open Valve 4 to direct water to the bottom grass
8
Bottom grass
9
Close valve 4 and open Valve 5 to water the top grass
10
Top grass
11
Valve 6 will water the flower bed above the retaining wall
12
It takes about 10min to empty the grey water tank, I try and water the top and bottom grass per tank
13
During load shedding the pool timer resets, this button will manually put the pump on
14
When the timer has been put to manual On, this breaker can be used to switch pool pump on and off
15
Run pool pump 2-4 hours a day, I will set the timer before we leave, hopefully it will not reset.
16