Fishing Lure Tumbler Tutorial
I am a wife and a mother of 3. I love Jesus, glitter, my glue gun & making tumblers & resin art. ❤️
See more from the_wandering_feather
First, spray 1/3 of the tumbler. This will be the “ belly” of the lure. Let dry.
1
Pull fishnet tight over the cup & spray from the top. Hold can far away to mist the colors in place.
2
Wait until fully dry and remove the fishnet. Admire your perfect paint job on your tumbler and hand😉
3
Apply your epoxy! I ❤️ Counter Culture DIY epoxy! It’s all I use on my tumblers.
4
While your 1st coat of epoxy is curing, cut out your design.
5
Time to apply your lure decals! ( Make sure you have 2 reversed images).
6
Add your choice of eye color. I love the holographic and opal vinyl for this.
7
Carefully line up your decal making sure it is straight. Burnish it to make sure it is on good.
8
Apply your other decal to the other side making sure to line it up even with the other side.
9
Time for another coat of Fast set epoxy! Woop woop! It cures to touch in just 2 hours!!!
10
Apply your epoxy evenly. I used 20ml for this 20oz.
11
Pop them bubbles and give it one last once over.
12
Finish with a final coat of CCDIY Artist resin and you are done! Have fun and thanks for watching!
13