AUTOPLAY
Eylure LashTint
11 steps
Tinting lashes at home
What you’ll need
Eylure Lash Tint
Petroleum Jelly
Eylure Lash Curler
Patch test 48hours before. Read instructions. Clean face and remove any mascara residue.
1. Patch test 48hours before. Read instructions. Clean face and remove any mascara residue.
1
Apply petroleum jelly to eyelids & under eye to avoid skin staining. Avoid touching your eyelashes.
2. Apply petroleum jelly to eyelids & under eye to avoid skin staining. Avoid touching your eyelashes.
2
Decant 1cm of the Activating Gel to a dimple on the product tray.
3. Decant 1cm of the Activating Gel to a dimple on the product tray.
3
Bend the wand to allow easy application. Coat the wand and brush through top and lower lashes.
4. Bend the wand to allow easy application. Coat the wand and brush through top and lower lashes.
4
Leave 2 to 8 minutes to develop. Longer time will have darker intense results.
5. Leave 2 to 8 minutes to develop. Longer time will have darker intense results.
5
Remove Activating Gel
6. Remove Activating Gel
6
Decant 1cm of Developer Gel to the other dimple.
7. Decant 1cm of Developer Gel to the other dimple.
7
Clean the wand and apply Developer Gel to your lashes.
8. Clean the wand and apply Developer Gel to your lashes.
8
When both eyes are done wait 1 to 4 minutes.
9. When both eyes are done wait 1 to 4 minutes.
9
Remove Developer Gel using clean cotton pads.
10. Remove Developer Gel using clean cotton pads.
10
Optional extra curl your lashes.
11. Optional extra curl your lashes.
11
Thanks!