AUTOPLAY
Eylure Dybrow
15 steps
Hello!
What you’ll need
Eylure Dybrow
Barry M White Kohl Pencil
Eylure Brow Comb Tweezers
Petroleum Jelly
Eylure Brow Tame And Define Wax
Don't tweeze or wax before tinting. This opens the follicle and if dye enters can cause issues.
1. Don't tweeze or wax before tinting. This opens the follicle and if dye enters can cause issues.
1
Read the instructions and do a patch test. Tie your hair back so you don't smudge the dye.
2. Read the instructions and do a patch test. Tie your hair back so you don't smudge the dye.
2
I'm using Dark Brown. Apply 3cm of Cream Colour to the mixing dimple in the product tray
3. I'm using Dark Brown. Apply 3cm of Cream Colour to the mixing dimple in the product tray
3
Next add 3 drops of the Activator in with the Cream Colour.
4. Next add 3 drops of the Activator in with the Cream Colour.
4
Using the back of the wand mix the Cream & Activator thoroughly till its a smooth paste.
5. Using the back of the wand mix the Cream & Activator thoroughly till its a smooth paste.
5
Using Petroleum Jelly product apply a barrier on areas around the brows so the areas stay dye free.
6. Using Petroleum Jelly product apply a barrier on areas around the brows so the areas stay dye free.
6
Bend the wand to a right angle, brush the mixed Cream & Activator into the brows.
7. Bend the wand to a right angle, brush the mixed Cream & Activator into the brows.
7
Once both brows are covered wait 5 to 10 minutes for full dark tone and less for lightet colour.
8. Once both brows are covered wait 5 to 10 minutes for full dark tone and less for lightet colour.
8
Using damp (not too wet) cotton pads remove the mix from brows. Enjoy admiring your beautiful brows.
9. Using damp (not too wet) cotton pads remove the mix from brows. Enjoy admiring your beautiful brows.
9
Use an eyepencil measure from the outer nostril, corner of nose and middle of the eye for a guide.
10. Use an eyepencil measure from the outer nostril, corner of nose and middle of the eye for a guide.
10
Using your Tweezers start with your 'mono brow' area that we measured. Stay in the lines!
11. Using your Tweezers start with your 'mono brow' area that we measured. Stay in the lines!
11
Wash your wand to remove all product residue.
12. Wash your wand to remove all product residue.
12
Brush& hold brow to see which hairs do not sit in the brow shape. Tweeze these hairs.
13. Brush& hold brow to see which hairs do not sit in the brow shape. Tweeze these hairs.
13
Remove your eye pencil marks.
14. Remove your eye pencil marks.
14
Using brow wax brush your brows in to shape. Wash wand again to store.
15. Using brow wax brush your brows in to shape. Wash wand again to store.
15
Thank You for watching