AUTOPLAY
Easy Glass Etching
12 steps
use your machine to cut your design, and weed away the image that you would normally keep
1. use your machine to cut your design, and weed away the image that you would normally keep
1
this will be the image you want to etch
2. this will be the image you want to etch
2
spray your glass with alcohol for a clean surface
3. spray your glass with alcohol for a clean surface
3
apply transfer tape
4. apply transfer tape
4
leave extra transfer tape around the stencil
5. leave extra transfer tape around the stencil
5
apply your armour etch cream
6. apply your armour etch cream
6
apply a thick amount with a brush
7. apply a thick amount with a brush
7
cover entire image, and keep inside the vinyl
8. cover entire image, and keep inside the vinyl
8
leave on 15 minutes
9. leave on 15 minutes
9
use gloves, and rinse under running water
10. use gloves, and rinse under running water
10
dab away water
11. dab away water
11
peel away vinyl, and your project is finished
12. peel away vinyl, and your project is finished
12