AUTOPLAY
DIY Welcome Sign With Circuit
9 steps
What you’ll need
Cricut Permanent Vinyl
Buy
Blank Wood Sign
Buy
Transfer Paper
Buy
After setting the design to the right size, place your vinyl onto the mat and smooth it out.
1. After setting the design to the right size, place your vinyl onto the mat and smooth it out.
1
Set your Cricut to vinyl and insert the mat.
2. Set your Cricut to vinyl and insert the mat.
2
Sit back and let the Cricut do its thing!
3. Sit back and let the Cricut do its thing!
3
Gently remove the vinyl from the mat.
4. Gently remove the vinyl from the mat.
4
Pull the excess vinyl off being careful not to rip your design.
5. Pull the excess vinyl off being careful not to rip your design.
5
Cut the excess backing off and lay your transfer paper onto your design. Make sure to smooth it out.
6. Cut the excess backing off and lay your transfer paper onto your design. Make sure to smooth it out.
6
Gently remove the backing.
7. Gently remove the backing.
7
Place your design on the wood and smooth it out to make sure it is secure.
8. Place your design on the wood and smooth it out to make sure it is secure.
8
Thanks for watching!
9. Thanks for watching!
9