AUTOPLAY
DIY pom-pom wall hanging
11 steps
What you'll need. Pom makers, string, cotton thread, embroidery needle, scissors and a piece of wood
1. What you'll need. Pom makers, string, cotton thread, embroidery needle, scissors and a piece of wood
1
Get a nice mix of yarns ready to pom
2. Get a nice mix of yarns ready to pom
2
Wrap your yarn around both sides of the maker until it is full. Cut along the middle & tie to secure
3. Wrap your yarn around both sides of the maker until it is full. Cut along the middle & tie to secure
3
Once you have made all of you poms, you need to cut your cotton string to length
4. Once you have made all of you poms, you need to cut your cotton string to length
4
I cut three equal lengths, and tied onto the driftwood with a double knot
5. I cut three equal lengths, and tied onto the driftwood with a double knot
5
Grab your needle and thread the first string
6. Grab your needle and thread the first string
6
Thread on each pom-pom, and repeat on each length of string
7. Thread on each pom-pom, and repeat on each length of string
7
To secure the bottom of each length, we will pop a button on
8. To secure the bottom of each length, we will pop a button on
8
Thread through the holes, then run your needle back up through the last pompom and double knot
9. Thread through the holes, then run your needle back up through the last pompom and double knot
9
Trim the long length & repeat with the other strands
10. Trim the long length & repeat with the other strands
10
Tie on your string to each side of the wood with a double knot and it's ready to hang!
11. Tie on your string to each side of the wood with a double knot and it's ready to hang!
11