DIY Pipe Mudroom Shelves
Latina wanderlust mom seeking cool&chill for my fam via entertainment-DIY-travel-recipes! Fangirl
http://www.coolmomscooltips.com
See more from coolchillmom
Rip down 3/4” plywood on the table saw to make the shelves
1
For the lower shelf (will also serve as a bench) glue and screw two layers of the plywood together
2
Screw together all the different pieces of pipe
3
Then screw the pipes to the underside of the bench
4
Lightly sand all the edges of the plywood
5
Seal the plywood with two coats of Minwax Polycrylic
6
Screw the two upper shelves as a unit before lifting it up into place and screwing it to the wall
7
You can make this project in a variety of different sizes
8
For more detailed instructions please visit Homemade-Modern.com
9
1/2” Iron Fittings
3/4 Inch Plywood
1/2” Iron Pipes