AUTOPLAY
DIY Ouija Board Vinyl Transfer Cricut Maker
7 steps
Hello!
Cut a piece of balsa wood to size and sloppily paint with shades of brown watercolor.
1. Cut a piece of balsa wood to size and sloppily paint with shades of brown watercolor.
1
Use our template, size and follow machine prompts.
2. Use our template, size and follow machine prompts.
2
Lay vinyl facing up on a standard grip mat, load the machine and watch the Cricut do it’s magic!
3. Lay vinyl facing up on a standard grip mat, load the machine and watch the Cricut do it’s magic!
3
Press and carefully remove the surrounding vinyl.
4. Press and carefully remove the surrounding vinyl.
4
Peel and press the transfer tape over the vinyl and remove from the mat.
5. Peel and press the transfer tape over the vinyl and remove from the mat.
5
Gently peel off transfer tape backing and position on the center of the wood. Smooth and peel off.
6. Gently peel off transfer tape backing and position on the center of the wood. Smooth and peel off.
6
Magic!
7. Magic!
7
Thanks!