AUTOPLAY
DIY Mudcloth Clock
9 steps
What you’ll need
Any Size Canvas
Clock Kit
Heavy Duty Stapler & Staples
Buy
Mudcloth
Buy
Cut a piece of Mudcloth approximately 1.5” wider and longer than the canvas on each side.
1. Cut a piece of Mudcloth approximately 1.5” wider and longer than the canvas on each side.
1
Place the canvas face down on the wrong side of the Mudcloth. Staple the fabric to the center top.
2. Place the canvas face down on the wrong side of the Mudcloth. Staple the fabric to the center top.
2
Do the same directly across at the bottom to stabilize the fabric.
3. Do the same directly across at the bottom to stabilize the fabric.
3
Finish one edge pulling tauntly staying 1” away from each corner. Then do the opposite edge.
4. Finish one edge pulling tauntly staying 1” away from each corner. Then do the opposite edge.
4
Staple the center of the right side, then the left pulling tauntly.
5. Staple the center of the right side, then the left pulling tauntly.
5
Miter the corners by folding over the excess fabric at an angle.
6. Miter the corners by folding over the excess fabric at an angle.
6
Staple each corner down.
7. Staple each corner down.
7
Turn over to apply the clock pieces.
8. Turn over to apply the clock pieces.
8
Make a small hole then add the clock mechanisms by following the instructions in the clock kit.
9. Make a small hole then add the clock mechanisms by following the instructions in the clock kit.
9
Voila!