AUTOPLAY
Decorative Resin Convo Hearts
14 steps
Aren’t they so fun?
What you’ll need
Silicone Heart Mold
Cricut Access
Mixing Cup
Peachy Olive Glitters
Buy
Cricut Weeding Tool
Lighter
Grafix Clear Craft Plastic
Cricut Machine
Mixing Stick
Respirator Mask
Cricut Scraper Tool
Toothpicks
Red Vinyl
Art Resin
Buy
Gloves
Transfer Tape
Scissors
Create your conversation vinyl stickers in DS. I used font: Monday from Cricut Access.
1. Create your conversation vinyl stickers in DS. I used font: Monday from Cricut Access.
1
Cut with Cricut and weed designs.
2. Cut with Cricut and weed designs.
2
Transfer designs to transfer tape and onto clear craft plastic. Use scraper tool to burnish.
3. Transfer designs to transfer tape and onto clear craft plastic. Use scraper tool to burnish.
3
Cut out the designs from the plastic sheet.
4. Cut out the designs from the plastic sheet.
4
Measure & mix resin: See resin mixing tutorial for full instructions.
5. Measure & mix resin: See resin mixing tutorial for full instructions.
5
Apply a thin layer of clear resin to the bottom of the mold. I used about 15 ml for each mold.
6. Apply a thin layer of clear resin to the bottom of the mold. I used about 15 ml for each mold.
6
Apply resin to the front on vinyl to reduce bubbles before inserting face down (backwards) in resin.
7. Apply resin to the front on vinyl to reduce bubbles before inserting face down (backwards) in resin.
7
Tap it down to the bottom of the mold with the blunt end of the toothpick.
8. Tap it down to the bottom of the mold with the blunt end of the toothpick.
8
Use a lighter to pop any micro bubbles.
9. Use a lighter to pop any micro bubbles.
9
Allow this layer to cure for at least 3 hours before proceeding to the colored layer.
10. Allow this layer to cure for at least 3 hours before proceeding to the colored layer.
10
Mix more resin. I mixed 60 mls & split in half. Add glitter & pour into molds.
11. Mix more resin. I mixed 60 mls & split in half. Add glitter & pour into molds.
11
Repeat with multiple colors! I used 30 mls of resin for each colored layer.
12. Repeat with multiple colors! I used 30 mls of resin for each colored layer.
12
After 24 hours it’s.... TIME TO DEMOLD! At this point you can do so many things or just be finished!
13. After 24 hours it’s.... TIME TO DEMOLD! At this point you can do so many things or just be finished!
13
Watch my tutorial for “doming” to see how I finished off these pieces.
14. Watch my tutorial for “doming” to see how I finished off these pieces.
14
Thanks for watching!