AUTOPLAY
Create A Dreamy & Glowing Photo Booth
8 steps
Hello!
What you’ll need
Photo Booth With Sheet Backdrop
Painter’s Tape
150-300 White Twinkle Lights
Fasteners (Safety Or Bobby Pins, Clips Etc.)
Scissors
Detangle your lights!
1. Detangle your lights!
1
On back of photo booth, cut two holes through the top seam every 8-10” (skip if using safety pins)
2. On back of photo booth, cut two holes through the top seam every 8-10” (skip if using safety pins)
2
Use a fastener to connect your string of lights (this one had 3 wires, so we started with 2 wires)
3. Use a fastener to connect your string of lights (this one had 3 wires, so we started with 2 wires)
3
Slide the fastener through the two fabric holes
4. Slide the fastener through the two fabric holes
4
If you have another wire, slide it in last for extra security
5. If you have another wire, slide it in last for extra security
5
Let the light string fall downward, close to ground, before guiding strand up to next set of holes
6. Let the light string fall downward, close to ground, before guiding strand up to next set of holes
6
You can anchor strand to PVC with painter’s tape
7. You can anchor strand to PVC with painter’s tape
7
If you have excess strand at the end, be creative in how you use it!
8. If you have excess strand at the end, be creative in how you use it!
8
Thanks!