AUTOPLAY
Craft Your Own Festive Fabric Coasters
13 steps
Hello!
What you’ll need
Flannel Shirt
Thread
Ruler
Solid Color T-Shirt
Needle
Scissors
Tape
Measure a square 4.5” wide and high- plaid helps because of the lines
1. Measure a square 4.5” wide and high- plaid helps because of the lines
1
Cut out
2. Cut out
2
You will need 4 squares for a set
3. You will need 4 squares for a set
3
Repeat with your solid colored shirt or fabric
4. Repeat with your solid colored shirt or fabric
4
Make sure both fabrics line up and trim off any over-hang
5. Make sure both fabrics line up and trim off any over-hang
5
Tape the edge of your thread, cut on an angle, and thread the needle
6. Tape the edge of your thread, cut on an angle, and thread the needle
6
From the plain side corner, .25” deep, pierce your needle through to the patterned side
7. From the plain side corner, .25” deep, pierce your needle through to the patterned side
7
After coming through the plaid, pierce through the solid side again, about .25” away from the first
8. After coming through the plaid, pierce through the solid side again, about .25” away from the first
8
Continue stitching around the edges
9. Continue stitching around the edges
9
When you come to a corner, stitch through the patterned side, as close to the corner as possible
10. When you come to a corner, stitch through the patterned side, as close to the corner as possible
10
Start a new side by piercing through the solid side and continue stitching
11. Start a new side by piercing through the solid side and continue stitching
11
After all sides are done, make a corner stitch again, with the needle coming out the plain side
12. After all sides are done, make a corner stitch again, with the needle coming out the plain side
12
Trim both ends of your string, knot them together twice, trim again
13. Trim both ends of your string, knot them together twice, trim again
13
Thanks!