AUTOPLAY
Covering Your Aliceband & Adding Your Flower
7 steps
Plug your glue gun in so it can warm up.
1. Plug your glue gun in so it can warm up.
1
Put some glue in the aliceband and start wrapping the ribbon at an angle.
2. Put some glue in the aliceband and start wrapping the ribbon at an angle.
2
Add some glue to the end and push down with your finger to secure the ribbon in place.
3. Add some glue to the end and push down with your finger to secure the ribbon in place.
3
Glue the centre of the flower down on the side of the aliceband.
4. Glue the centre of the flower down on the side of the aliceband.
4
Place some glue on each side of the flower to make sure it’s more secure on the aliceband.
5. Place some glue on each side of the flower to make sure it’s more secure on the aliceband.
5
Use a piece of fabric to cut into an oval.
6. Use a piece of fabric to cut into an oval.
6
Place glue along the edge of the piece of oval fabric and carefully put it onto back of aliceband.
7. Place glue along the edge of the piece of oval fabric and carefully put it onto back of aliceband.
7
Thank you for watching.