AUTOPLAY
Countdown to Christmas with Dry Erase Vinyl
9 steps
Hello!
What you’ll need
Scrap Wood Block
Cricut Design Space
Cricut Weeding Tool
Dry Erase Vinyl
Buy
Holli Mostella’s SVG
Buy
Patterned Vinyl Buffalo Plaid
Buy
White Vinyl
Cricut Scraper Tool
Gorilla Hot Glue
Hammer
Sponge Brush for Eraser
Black Felt
Cricut Machine
Hot Glue Gun
Dry Erase Marker
1
Sawtooth Picture Hangers
Measure, cut, apply pattern vinyl to your scrap wood block.
1. Measure, cut, apply pattern vinyl to your scrap wood block.
1
Upload SVG & insert it into your project. Add a circle to the center for dry erase vinyl.
2. Upload SVG & insert it into your project. Add a circle to the center for dry erase vinyl.
2
Cut the design with your Cricut and weed.
3. Cut the design with your Cricut and weed.
3
Transfer design onto the wood block with transfer tape. Burnish with scraper tool. Remove tape.
4. Transfer design onto the wood block with transfer tape. Burnish with scraper tool. Remove tape.
4
Trace, cut, hot glue black felt to all 4 sides of the block. You could paint or use vinyl instead.
5. Trace, cut, hot glue black felt to all 4 sides of the block. You could paint or use vinyl instead.
5
Use marker to measure felt & cut. Hot glue together. Cut circle for the bottom & hot glue.
6. Use marker to measure felt & cut. Hot glue together. Cut circle for the bottom & hot glue.
6
Hot glue the felt to the sides of the block to hold the marker & sponge brush eraser.
7. Hot glue the felt to the sides of the block to hold the marker & sponge brush eraser.
7
Optional: Hammer a sawtooth picture hanger onto the back of the block.
8. Optional: Hammer a sawtooth picture hanger onto the back of the block.
8
Hang or stand up on flat surface and enjoy counting down to Christmas!
9. Hang or stand up on flat surface and enjoy counting down to Christmas!
9
Thanks!