AUTOPLAY
Change 2014 Toyota Corolla Oil
12 steps
What you’ll need
1
Oil Filter 57064
1
Oil Pan
1
14mm Wrench/Socket
5 Qts
SAE 0W-20 Oil
Raise the front of your car so you can work under it.
1. Raise the front of your car so you can work under it.
1
Place an oil pan beneath where the oil is going to come out.
2. Place an oil pan beneath where the oil is going to come out.
2
Remove the oil bolt with a 14mm wrench.
3. Remove the oil bolt with a 14mm wrench.
3
After draining all the oil, replace the bolt.
4. After draining all the oil, replace the bolt.
4
Remove the pin that keeps the oil filter in place.
5. Remove the pin that keeps the oil filter in place.
5
Unscrew the oil filter and allow it to drain.
6. Unscrew the oil filter and allow it to drain.
6
Replace old filter. Remember to put some oil onto the new green gasket to stop it from binding.
7. Replace old filter. Remember to put some oil onto the new green gasket to stop it from binding.
7
Replace oil filter and pin- only tighten by hand, they are a pain to get off if too tight.
8. Replace oil filter and pin- only tighten by hand, they are a pain to get off if too tight.
8
Pop the hood.
9. Pop the hood.
9
Unscrew the lid to gain access to where you need to pour in the oil.
10. Unscrew the lid to gain access to where you need to pour in the oil.
10
Slowly pour in roughly 5 qts. of oil.
11. Slowly pour in roughly 5 qts. of oil.
11
Replace cap.
12. Replace cap.
12