AUTOPLAY
Brave Bracelet With Impressart
9 steps
Prepare your blank by removing protective cover. For long projects, turn your block into a diamond
1. Prepare your blank by removing protective cover. For long projects, turn your block into a diamond
1
Tape the ends of your blank to prevent movement while hammering
2. Tape the ends of your blank to prevent movement while hammering
2
Apply your guide. Mark your letters according to the notches for best spacing
3. Apply your guide. Mark your letters according to the notches for best spacing
3
Slide the letters to the guide, and strike with hammer. Don’t be hesitant to make a hard hit
4. Slide the letters to the guide, and strike with hammer. Don’t be hesitant to make a hard hit
4
Peel away your guide and tape
5. Peel away your guide and tape
5
Using your enamel pen, color in your letters
6. Using your enamel pen, color in your letters
6
Allow around 3-5 minutes to dry. Blot with a paper towel, then lightly wipe away extra enamel
7. Allow around 3-5 minutes to dry. Blot with a paper towel, then lightly wipe away extra enamel
7
Your letters should be dark. If not, apply more pressure with the hammer
8. Your letters should be dark. If not, apply more pressure with the hammer
8
Using the bending bar, bend to a 90° angle. Repeat on the other side
9. Using the bending bar, bend to a 90° angle. Repeat on the other side
9