AUTOPLAY
Beach Glitter Tumbler
14 steps
Prep cup. Gather glitter and epoxy of choice.
1. Prep cup. Gather glitter and epoxy of choice.
1
Pour 2.5ml of both part A and part B. Mix until clear.
2. Pour 2.5ml of both part A and part B. Mix until clear.
2
Spread a thin layer of epoxy over the entire cup.
3. Spread a thin layer of epoxy over the entire cup.
3
Start with the gold glitter for the sand. No need for straight lines.
4. Start with the gold glitter for the sand. No need for straight lines.
4
Add the white for the foam. Blend in with the gold and no straight lines.
5. Add the white for the foam. Blend in with the gold and no straight lines.
5
Start with the lightest blue.
6. Start with the lightest blue.
6
Continue to add the next shade of blue. Remember to blend and no straight lines.
7. Continue to add the next shade of blue. Remember to blend and no straight lines.
7
The final layer of blue should be the darkest.
8. The final layer of blue should be the darkest.
8
Don’t be afraid to go back over another color to get a good blend.
9. Don’t be afraid to go back over another color to get a good blend.
9
Let the epoxy set. Then spray a sealant before adding 1st layer of epoxy.
10. Let the epoxy set. Then spray a sealant before adding 1st layer of epoxy.
10
Mix equal parts A and B of epoxy. This cup took 10ml each. Remember, glitter soaks up epoxy.
11. Mix equal parts A and B of epoxy. This cup took 10ml each. Remember, glitter soaks up epoxy.
11
Spread the epoxy evenly over the entire cup.
12. Spread the epoxy evenly over the entire cup.
12
Use a torch to get rid of any micro bubbles.
13. Use a torch to get rid of any micro bubbles.
13
Let your epoxy set. Then add any design details!
14. Let your epoxy set. Then add any design details!
14