Setting Up The iPad Studio!
Make sure the camera module is not behind one of the mounting arms.
This is the knob to tighten the iPad to the tripod.
Make sure the bottom lip of the quick-release plate is securely in the jaw of the mount!
Make sure the top lip is under the jaw before tightening the knob.
Cable from the receiver goes into black/gray adapter, then the lightning adapter, then to the iPad.
Use this knob to add/reduce tension when you pan left/right with the iPad.
Loosen this knob to tilt the iPad up or down then tighten enough so that the iPad does not sag.
Open the Receiver door and press the on/off button to turn it on.
Turn in the Transmitter and slide the Mute switch away from the word MUTE!

Fred Mahusay