How To Make A Simple Bench Top
Cut your boards roughly to length on the mitre saw
Use jointer to flatten bottom and one edge
Send through the planer (flat side down)
Rip boards on table saw w/ jointed (flat) side against fence
Cut slots using a biscuit joiner
Add glue and biscuits, then clamp up
Square off each end
Sand the top down
Wipe on & off stain
Add sealer and poly, 3 coats should be good
Attach the top from the bottom using screws
And you’re have a seat. You earned it :)
Thanks for watching. Please subscribe for more videos!

Making Makers