joannacraftsu
Floral Bloom Wall Decor
11 STEPS
Cricut Design Space
Cricut Machine
Acrylic Paint
Paint Brush
Cricut Design Space
Cricut Machine
Acrylic Paint
Paint Brush
Flowers
Test Tubes
Twine
Nails
Hammer
Saw Tooth Picture Hangers
Vinyl
2 Wood Pieces
Eye Screws
Hook Screws
Transfer Tape
Measuring Tape
Pencil
Cricut Weeding Tool
Cricut Scraper Tool
Self Drilling Drywall Anchors
Phillips Head Screwdriver
Paint wood pieces with acrylic paint color of choice. Back is optional. I used 2 coats. Let dry.
1
Design, cut, & weed your vinyl decals.
2
Apply your decals with transfer tape using the Cricut Scraper Tool to burnish.
3
Add nails, equally spaced, across the back of the larger wood piece, to hang your test tubes from.
4
Apply hook screws & eye screws. Pre-drill holes optional. They do self tap.
5
Measure & add twine to test tubes with hot glue. Wrap twine around tube to secure in place.
6
Measure & mark for placement. Add hot glue and wrap twine around each end 1-2 inches from the edge.
7
Add 2 sawtooth picture hangers to the back of the smaller wood piece. Make sure they’re even!
8
Hang: 1. Measure. 2. Add drywall anchors. 3. Attach the sawtooth hangers onto the drywall anchors.
9
Add flowers & hang twine-test tubes on nails. Optional: Add 1 clear marble to each tube.
10
Attach the bottom piece by hooking the hook screws onto the eye screws on the top piece. All done!
11